ft232h_breakout [UWiki XXX]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== FT232H breakout ======
The FT232H breakout adds GPIO pins to any computer with USB. It's capable of I2C, SPI, UART serial, JTAG, and more [(ada_ft232h)]. 

{{ ::ft232h-breakout-pinout.jpg?400 |}}

^ Pin ^ GPIO ^ UART ^ I2C ^ SPI ^
| D0 | No | TX | SCL | SCLK |
| D1 | No | RX | SDA | MOSI |
| D2 | No | RTS (optional) | SDA | MISO |
| D3 | No | CTS (optional) | | CS0 |
| D4 | Yes | DTR (optional) | | |
| D5 | Yes | DSR (optional) | | |
| D6 | Yes | DCD (optional) | | |
| D7 | Yes | | |
| C0 | Yes |
| C1 | Yes |
| C2 | Yes |
| C3 | Yes |
| C4 | Yes |
| C5 | Yes |
| C6 | Yes |
| C7 | Yes |

===== Usage =====
Out of the box, the board presents itself as a USB-to-UART converter. Connecting TX to RX and sending data with a serial console (screen or PuTTY) should echo typed characters to the screen.

===== References =====
[(ada_blinka>https://learn.adafruit.com/circuitpython-on-any-computer-with-ft232h)]
[(ada_circuitpython>https://learn.adafruit.com/circuitpython-on-raspberrypi-linux)]
[(ada_ft232h>https://learn.adafruit.com/adafruit-ft232h-breakout)]
[(docs_blinka>https://docs.circuitpython.org/projects/blinka/en/latest/)]
[(docs_circuitpython>https://docs.circuitpython.org/en/latest/docs/index.html)]