Differences

This shows you the differences between two versions of the page.

--- sounds:a-148 [2022-12-10 22:02] – created asdf
+++ sounds:a-148 [2023-05-27 19:06] (current) – asdf
@@ Line 2: / Line 2: @@
 {{ :sounds:a-148.jpg|}}
-Dual sample-and-hold.
+---- dataentry euromodule ----
+width: 4HP
+depth: 30mm
+v: 20mA
+-12v: 20mA
+v: 0mA
+types: S+H, T+H
+racks: BFE
+mg_url: https://www.modulargrid.net/e/doepfer-a-148v
+----
-**Be careful when connecting this module to power!** The power header is not keyed or well-marked, as is typical for Doepfer modules.
+Dual sample-and-hold/track-and-hold. Each channel has a jumper to configure the mode. By default, the bottom channel is set to T+H. Note that in T+H mode, the hold trigger must be a **falling** edge (thus a high input is necessary to enable tracking).
+Regrettably, this module gets the least use in my current rack.
+{{tag>"sample and hold" "track and hold" eurorack}}