Doepfer A-148
- width:
- 4HP
- depth:
- 30mm
- 12v:
- 20mA
- -12v:
- 20mA
- 5v:
- 0mA
- type:
- S+H, T+H
- rack:
- BFE
- mg:
- https://www.modulargrid.net/e/doepfer-a-148v
Dual sample-and-hold/track-and-hold. Each channel has a jumper to configure the mode. By default, the bottom channel is set to T+H. Note that in T+H mode, the hold trigger must be a falling edge (thus a high input is necessary to enable tracking).
Regrettably, this module gets the least use in my current rack.