Show pageOld revisionsBacklinksFold/unfold allBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Doepfer A-148 ====== {{ :sounds:a-148.jpg|}} ---- dataentry euromodule ---- width: 4HP depth: 30mm 12v: 20mA -12v: 20mA 5v: 0mA types: S+H, T+H racks: BFE mg_url: https://www.modulargrid.net/e/doepfer-a-148v ---- Dual sample-and-hold/track-and-hold. Each channel has a jumper to configure the mode. By default, the bottom channel is set to T+H. Note that in T+H mode, the hold trigger must be a **falling** edge (thus a high input is necessary to enable tracking). Regrettably, this module gets the least use in my current rack. {{tag>"sample and hold" "track and hold" eurorack}} sounds/a-148.txt Last modified: 2023-05-27 19:06by asdf